{"id":758,"date":"2026-10-25T13:18:51","date_gmt":"2026-10-25T12:18:51","guid":{"rendered":"https:\/\/nano-bau.com\/?post_type=product&#038;p=758"},"modified":"2026-10-25T14:17:28","modified_gmt":"2026-10-25T13:17:28","slug":"fasada-protect-h100","status":"publish","type":"product","link":"https:\/\/nano-bau.com\/index.php\/produkt\/fasada-protect-h100\/","title":{"rendered":"FASADA PROTECT H100"},"content":{"rendered":"<div class=\"nb-product-content\">\n<p><strong>FASADA PROTECT H100<\/strong> by NANO-BAU: An impregnation for facade renders that reduces water absorption in renders and selected facade coatings. The colourless protection helps retain the appearance of facades exposed to rain and airborne dirt.<\/p>\n<nav aria-label=\"On this page\">\n<h2>10 practical topics for FASADA PROTECT H100<\/h2>\n<ol>\n<li><a href=\"#nb-section-1\">Properties and performance<\/a><\/li>\n<li><a href=\"#nb-section-2\">Water-repellent treatment for renders and facades<\/a><\/li>\n<li><a href=\"#nb-section-3\">Technical parameters<\/a><\/li>\n<li><a href=\"#nb-section-4\">Surface preparation<\/a><\/li>\n<li><a href=\"#nb-section-5\">Application method<\/a><\/li>\n<li><a href=\"#nb-section-6\">Conditions and drying time<\/a><\/li>\n<li><a href=\"#nb-section-7\">Consumption, packs and calculations<\/a><\/li>\n<li><a href=\"#nb-section-8\">Maintenance and limitations<\/a><\/li>\n<li><a href=\"#nb-section-9\">Storage and safety<\/a><\/li>\n<li><a href=\"#nb-section-10\">Product questions<\/a><\/li>\n<\/ol>\n<\/nav>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.nanobau.uk\/assets\/catalogue\/9a193233456e-5l_nb_fasada_protect_h100_ikony2.jpg\" alt=\"NANO-BAU FASADA PROTECT H100 \u2014 Water-repellent treatment for renders and facades\" width=\"600\" height=\"600\" loading=\"lazy\" \/><\/figure>\n<section id=\"nb-section-1\">\n<h2>FASADA PROTECT H100 \u2014 Properties and performance<\/h2>\n<ul>\n<li>Reduces water absorption in renders and selected facade coatings.<\/li>\n<li>Protection selected for the material and its natural finish.<\/li>\n<li>Defined preparation and trial procedures help assess the result.<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-2\">\n<h2>Water-repellent treatment for renders and facades<\/h2>\n<h3>Substrates<\/h3>\n<ul>\n<li>acrylic, silicone and silicate renders<\/li>\n<li>mineral and cement-lime renders compatible with the label<\/li>\n<\/ul>\n<ul>\n<li>building facade protection<\/li>\n<li>maintenance of decorative renders<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-3\">\n<h2>FASADA PROTECT H100 \u2014 Technical parameters<\/h2>\n<div class=\"catalogue-table-scroll\">\n<table class=\"catalogue-table\">\n<thead>\n<tr>\n<th scope=\"col\">Parameter<\/th>\n<th scope=\"col\">Value<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\">Product type<\/th>\n<td>Water-based, colourless and odourless impregnation<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Visual effect<\/th>\n<td>Natural appearance; assess the final result by trial<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Approximate consumption<\/th>\n<td>40\u201360 ml\/m\u00b2<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Approximate coverage<\/th>\n<td>Approximately 16.7\u201325 m\u00b2\/l<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Coats \/ sequence<\/th>\n<td>1; optionally 2, with the second applied only wet-on-wet<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Application method<\/th>\n<td>Even spraying or manual application as directed on the label<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">pH<\/th>\n<td>7<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Density<\/th>\n<td>1 g\/cm\u00b3<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">Shelf life<\/th>\n<td>3 years from the production date<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h3>Technical documentation<\/h3>\n<p><a class=\"catalogue-document\" href=\"https:\/\/districhem.eu\/wp-content\/uploads\/2026\/10\/NANO-BAU-FASADA-PROTECT-H100-karta-techniczna-PL-v2.pdf\" target=\"_blank\" rel=\"noopener\">PDF in Polish \u00b7 FASADA PROTECT H100 &#x2197;<\/a><\/p>\n<p>Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.<\/p>\n<p><a href=\"https:\/\/districhem.eu\/produkt\/nano-bau-faceade-protect-h100-wodny-i-bezbarwny-impregnat-do-tynkow-akrylowych-silikonowych-silikatowych-i-mineralnych\/\" target=\"_blank\" rel=\"noopener\">Product source &#x2197;<\/a><\/section>\n<section id=\"nb-section-4\">\n<h2>Surface preparation<\/h2>\n<p>First test a small, inconspicuous area.<\/p>\n<ol>\n<li>Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.<\/li>\n<li>Carry out a compatibility trial and assess the complete result before treating a larger area.<\/li>\n<\/ol>\n<\/section>\n<section id=\"nb-section-5\">\n<h2>FASADA PROTECT H100 \u2014 Application method<\/h2>\n<ol>\n<li>Shake; do not dilute. Apply one coat, or two wet-on-wet, to a clean, dry substrate.<\/li>\n<li>Temperature +5 to +30\u00b0C; at least 3 hours without rain.<\/li>\n<li>After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.<\/li>\n<\/ol>\n<\/section>\n<section id=\"nb-section-6\">\n<h2>Conditions and drying time<\/h2>\n<p>Temperature +5 to +30\u00b0C; at least 3 hours without rain.<\/p>\n<\/section>\n<section id=\"nb-section-7\">\n<h2>Consumption, packs and calculations<\/h2>\n<p>Approximately 40\u201360 ml\/m\u00b2, equivalent to approximately 17\u201325 m\u00b2\/l.<\/p>\n<p>Complete treatment as instructed; no additional coat multiplier.<\/p>\n<div class=\"catalogue-table-scroll\">\n<table class=\"catalogue-table\">\n<thead>\n<tr>\n<th scope=\"col\">Pack sizes<\/th>\n<th scope=\"col\">Indicative pack coverage<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\">1 L<\/th>\n<td>16.67\u201325 m\u00b2<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">5 L<\/th>\n<td>83.33\u2013125 m\u00b2<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">10 L<\/th>\n<td>166.67\u2013250 m\u00b2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h3>Example for 50 m\u00b2<\/h3>\n<p>2\u20133 l<\/p>\n<\/section>\n<section id=\"nb-section-8\">\n<h2>Maintenance and limitations<\/h2>\n<p>The declared protection period is 6 years; actual performance depends on the substrate and conditions.<\/p>\n<ul>\n<li>Do not apply to dirty surfaces or incompatible coatings. The impregnation does not remove existing stains or replace crack repair or waterproofing. Assess protection on a clean surface and adapt renewal to service conditions.<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-9\">\n<h2>Storage and safety<\/h2>\n<ul>\n<li>3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label&#8217;s temperature requirements.<\/li>\n<\/ul>\n<p>Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.<\/p>\n<\/section>\n<section id=\"nb-section-10\">\n<h2>Product questions<\/h2>\n<div class=\"catalogue-faq\">\n<h3>Which surfaces is this product intended for?<\/h3>\n<ul>\n<li>acrylic, silicone and silicate renders<\/li>\n<li>mineral and cement-lime renders compatible with the label<\/li>\n<\/ul>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What consumption should I use?<\/h3>\n<p>Approximately 40\u201360 ml\/m\u00b2, equivalent to approximately 17\u201325 m\u00b2\/l.<\/p>\n<p>Complete treatment as instructed; no additional coat multiplier.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should the substrate be prepared?<\/h3>\n<ol>\n<li>Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.<\/li>\n<li>Carry out a compatibility trial and assess the complete result before treating a larger area.<\/li>\n<\/ol>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How is the product applied?<\/h3>\n<ol>\n<li>Shake; do not dilute. Apply one coat, or two wet-on-wet, to a clean, dry substrate.<\/li>\n<li>Temperature +5 to +30\u00b0C; at least 3 hours without rain.<\/li>\n<li>After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.<\/li>\n<\/ol>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What conditions are needed for drying?<\/h3>\n<p>Temperature +5 to +30\u00b0C; at least 3 hours without rain.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should durability and renewal be assessed?<\/h3>\n<p>The declared protection period is 6 years; actual performance depends on the substrate and conditions.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What are the limitations of use?<\/h3>\n<ul>\n<li>Do not apply to dirty surfaces or incompatible coatings. The impregnation does not remove existing stains or replace crack repair or waterproofing. Assess protection on a clean surface and adapt renewal to service conditions.<\/li>\n<\/ul>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should the product be stored?<\/h3>\n<ul>\n<li>3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label&#8217;s temperature requirements.<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<section>\n<h2>Planning your project with FASADA PROTECT H100<\/h2>\n<p>Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of FASADA PROTECT H100. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.<\/p>\n<p>Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.<\/p>\n<p>Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.<\/p>\n<p>Before applying FASADA PROTECT H100, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product&#8217;s limitations.<\/p>\n<p>Explore the <a href=\"https:\/\/nano-bau.com\/#produkty\">NANO-BAU product catalogue<\/a> to compare applications, or <a href=\"https:\/\/nano-bau.com\/#contact\">contact NANOBIZ.PL<\/a> for help identifying the appropriate product. This page describes FASADA PROTECT H100; it does not replace the instructions supplied with your particular pack.<\/p>\n<\/section>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p><strong>FASADA PROTECT H100<\/strong> by NANO-BAU: An impregnation for facade renders that reduces water absorption in renders and selected facade coatings. The colourless protection helps retain the appearance of facades exposed to rain and airborne dirt.<\/p>\n","protected":false},"featured_media":752,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[320],"product_cat":[323],"product_tag":[],"class_list":["post-758","product","type-product","status-publish","has-post-thumbnail","product_brand-nano-bau","product_cat-facades-and-brick","first","instock","shipping-taxable","product-type-external"],"acf":[],"_links":{"self":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product\/758","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/comments?post=758"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/media\/752"}],"wp:attachment":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/media?parent=758"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_brand?post=758"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=758"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=758"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}