{"id":814,"date":"2026-10-25T13:18:51","date_gmt":"2026-10-25T12:18:51","guid":{"rendered":"https:\/\/nano-bau.com\/?post_type=product&#038;p=814"},"modified":"2026-10-25T14:13:45","modified_gmt":"2026-10-25T13:13:45","slug":"solar-care-kit","status":"publish","type":"product","link":"https:\/\/nano-bau.com\/index.php\/produkt\/solar-care-kit\/","title":{"rendered":"SOLAR CARE KIT"},"content":{"rendered":"<div class=\"nb-product-content\">\n<p><strong>SOLAR CARE KIT<\/strong> by NANO-BAU: NANO-BAU Solar Care Kit is a treatment for solar-panel glass. CLEAN and COAT provide degreasing and water-repellent protection. Use must comply with the module manufacturer&#x27;s recommendations and those for its factory coating.<\/p>\n<nav aria-label=\"On this page\">\n<h2>10 practical topics for SOLAR CARE KIT<\/h2>\n<ol>\n<li><a href=\"#nb-section-1\">Properties and performance<\/a><\/li>\n<li><a href=\"#nb-section-2\">Preparation and protection of compatible solar-panel glass<\/a><\/li>\n<li><a href=\"#nb-section-3\">Technical parameters<\/a><\/li>\n<li><a href=\"#nb-section-4\">Surface preparation<\/a><\/li>\n<li><a href=\"#nb-section-5\">Application method<\/a><\/li>\n<li><a href=\"#nb-section-6\">Conditions and drying time<\/a><\/li>\n<li><a href=\"#nb-section-7\">Consumption, packs and calculations<\/a><\/li>\n<li><a href=\"#nb-section-8\">Maintenance and limitations<\/a><\/li>\n<li><a href=\"#nb-section-9\">Storage and safety<\/a><\/li>\n<li><a href=\"#nb-section-10\">Product questions<\/a><\/li>\n<\/ol>\n<\/nav>\n<figure><img loading=\"lazy\" decoding=\"async\" src=\"https:\/\/www.nanobau.uk\/assets\/catalogue\/d41d2f711722-1L-BIALA-MOCKUP-2000PX-%E2%80%94-nano-bau-%E2%80%94SOLAR-KIT.jpg\" alt=\"NANO-BAU SOLAR CARE KIT \u2014 Preparation and protection of compatible solar-panel glass\" width=\"600\" height=\"600\" loading=\"lazy\" \/><\/figure>\n<section id=\"nb-section-1\">\n<h2>SOLAR CARE KIT \u2014 Properties and performance<\/h2>\n<ul>\n<li>CLEAN and COAT provide degreasing and water-repellent protection for solar-panel glass.<\/li>\n<li>Protection selected for the material and its natural finish.<\/li>\n<li>Glass preparation and protection in the specified sequence.<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-2\">\n<h2>Preparation and protection of compatible solar-panel glass<\/h2>\n<h3>Substrates<\/h3>\n<ul>\n<li>glass solar-panel surfaces approved for this maintenance<\/li>\n<li>collector glass within the instructions&#8217; scope<\/li>\n<\/ul>\n<ul>\n<li>glass protection for solar installations<\/li>\n<li>maintenance after thorough panel cleaning<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-3\">\n<h2>SOLAR CARE KIT \u2014 Technical parameters<\/h2>\n<p>Approximately 10 ml\/m\u00b2; 250 ml + 250 ml for up to 25 m\u00b2, 500 ml + 500 ml for up to 50 m\u00b2, 1 l + 1 l for up to 100 m\u00b2.<\/p>\n<p>At least 6 hours without rain; avoid full sun. Do not apply to plastic, rubber, polycarbonate or metal.<\/p>\n<p>Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.<\/p>\n<p><a href=\"https:\/\/districhem.eu\/produkt\/nano-bau-solar-care-kit-zestaw-do-impregnacji-instalacji-solarnych-i-fotowoltaicznych\/\" target=\"_blank\" rel=\"noopener\">Product source &#x2197;<\/a><\/section>\n<section id=\"nb-section-4\">\n<h2>Surface preparation<\/h2>\n<p>First test a small, inconspicuous area.<\/p>\n<ol>\n<li>Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.<\/li>\n<li>Carry out a compatibility trial and assess the complete result before treating a larger area.<\/li>\n<\/ol>\n<\/section>\n<section id=\"nb-section-5\">\n<h2>SOLAR CARE KIT \u2014 Application method<\/h2>\n<ol>\n<li>Wash and dry the glass. Apply CLEAN with a cloth or mop, then distribute COAT evenly using a lightly dampened applicator. Correct streaks with CLEAN as instructed.<\/li>\n<li>At least 6 hours without rain; avoid full sun. Do not apply to plastic, rubber, polycarbonate or metal.<\/li>\n<li>After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.<\/li>\n<\/ol>\n<\/section>\n<section id=\"nb-section-6\">\n<h2>Conditions and drying time<\/h2>\n<p>At least 6 hours without rain; avoid full sun. Do not apply to plastic, rubber, polycarbonate or metal.<\/p>\n<\/section>\n<section id=\"nb-section-7\">\n<h2>Consumption, packs and calculations<\/h2>\n<p>Approximately 10 ml\/m\u00b2; 250 ml + 250 ml for up to 25 m\u00b2, 500 ml + 500 ml for up to 50 m\u00b2, 1 l + 1 l for up to 100 m\u00b2.<\/p>\n<p>Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.<\/p>\n<div class=\"catalogue-table-scroll\">\n<table class=\"catalogue-table\">\n<thead>\n<tr>\n<th scope=\"col\">Pack sizes<\/th>\n<th scope=\"col\">Indicative pack coverage<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<th scope=\"row\">250 ml impregnation + 250 ml cleaner<\/th>\n<td>Establish by trial and from the label<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">500 ml impregnation + 500 ml cleaner<\/th>\n<td>Establish by trial and from the label<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">1 L impregnation + 1 L cleaner<\/th>\n<td>Establish by trial and from the label<\/td>\n<\/tr>\n<tr>\n<th scope=\"row\">5 L impregnation + 5 L cleaner<\/th>\n<td>Establish by trial and from the label<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h3>Example for 50 m\u00b2<\/h3>\n<p>COAT: 0.5 l; CLEAN: 0.5 l<\/p>\n<\/section>\n<section id=\"nb-section-8\">\n<h2>Maintenance and limitations<\/h2>\n<p>Declared durability up to 5 years with appropriate maintenance.<\/p>\n<ul>\n<li>The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.<\/li>\n<\/ul>\n<\/section>\n<section id=\"nb-section-9\">\n<h2>Storage and safety<\/h2>\n<ul>\n<li>Check storage conditions and shelf life on each component&#8217;s label. Keep in tightly closed original packaging, out of children&#8217;s reach.<\/li>\n<\/ul>\n<p>Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.<\/p>\n<\/section>\n<section id=\"nb-section-10\">\n<h2>Product questions<\/h2>\n<div class=\"catalogue-faq\">\n<h3>Which surfaces is this product intended for?<\/h3>\n<ul>\n<li>glass solar-panel surfaces approved for this maintenance<\/li>\n<li>collector glass within the instructions&#8217; scope<\/li>\n<\/ul>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What consumption should I use?<\/h3>\n<p>Approximately 10 ml\/m\u00b2; 250 ml + 250 ml for up to 25 m\u00b2, 500 ml + 500 ml for up to 50 m\u00b2, 1 l + 1 l for up to 100 m\u00b2.<\/p>\n<p>Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should the substrate be prepared?<\/h3>\n<ol>\n<li>Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.<\/li>\n<li>Carry out a compatibility trial and assess the complete result before treating a larger area.<\/li>\n<\/ol>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How is the product applied?<\/h3>\n<ol>\n<li>Wash and dry the glass. Apply CLEAN with a cloth or mop, then distribute COAT evenly using a lightly dampened applicator. Correct streaks with CLEAN as instructed.<\/li>\n<li>At least 6 hours without rain; avoid full sun. Do not apply to plastic, rubber, polycarbonate or metal.<\/li>\n<li>After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.<\/li>\n<\/ol>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What conditions are needed for drying?<\/h3>\n<p>At least 6 hours without rain; avoid full sun. Do not apply to plastic, rubber, polycarbonate or metal.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should durability and renewal be assessed?<\/h3>\n<p>Declared durability up to 5 years with appropriate maintenance.<\/p>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>What are the limitations of use?<\/h3>\n<ul>\n<li>The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.<\/li>\n<\/ul>\n<\/div>\n<div class=\"catalogue-faq\">\n<h3>How should the product be stored?<\/h3>\n<ul>\n<li>Check storage conditions and shelf life on each component&#8217;s label. Keep in tightly closed original packaging, out of children&#8217;s reach.<\/li>\n<\/ul>\n<\/div>\n<\/section>\n<section>\n<h2>Planning your project with SOLAR CARE KIT<\/h2>\n<p>Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of SOLAR CARE KIT. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.<\/p>\n<p>Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.<\/p>\n<p>Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.<\/p>\n<p>Before applying SOLAR CARE KIT, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product&#8217;s limitations.<\/p>\n<p>Explore the <a href=\"https:\/\/nano-bau.com\/#produkty\">NANO-BAU product catalogue<\/a> to compare applications, or <a href=\"https:\/\/nano-bau.com\/#contact\">contact NANOBIZ.PL<\/a> for help identifying the appropriate product. This page describes SOLAR CARE KIT; it does not replace the instructions supplied with your particular pack.<\/p>\n<\/section>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p><strong>SOLAR CARE KIT<\/strong> by NANO-BAU: NANO-BAU Solar Care Kit is a treatment for solar-panel glass. CLEAN and COAT provide degreasing and water-repellent protection. Use must comply with the module manufacturer&#8217;s recommendations and those for its factory coating.<\/p>\n","protected":false},"featured_media":812,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[320],"product_cat":[325],"product_tag":[],"class_list":["post-814","product","type-product","status-publish","has-post-thumbnail","product_brand-nano-bau","product_cat-glass","first","instock","shipping-taxable","product-type-external"],"acf":[],"_links":{"self":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product\/814","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/comments?post=814"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/media\/812"}],"wp:attachment":[{"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/media?parent=814"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_brand?post=814"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_cat?post=814"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/nano-bau.com\/index.php\/wp-json\/wp\/v2\/product_tag?post=814"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}