ZESTAW DO KOSTKICleaning and impregnation of block paving
ZESTAW DO KOSTKI by NANO-BAU: The NANO-BAU paving kit combines a cleaner and an impregnation for paved surfaces. It separates paving preparation from the subsequent protection against water and dirt.
ZESTAW DO KOSTKI — Product overview
ZESTAW DO KOSTKI by NANO-BAU: The NANO-BAU paving kit combines a cleaner and an impregnation for paved surfaces. It separates paving preparation from the subsequent protection against water and dirt.
ZESTAW DO KOSTKI — Properties and performance
- Combines a cleaner and an impregnation for paved surfaces.
- Protection selected for the material and its natural finish.
- Cleaner and impregnation incorporated into the maintenance process.
Cleaning and impregnation of block paving
Substrates
- block paving compatible with both products
- concrete paving following a trial
- driveways and paths
- comprehensive maintenance of paved terraces
ZESTAW DO KOSTKI — Technical parameters
Document applies to: PAVING PROTECT
| Parameter | Value |
|---|---|
| Product type | Water-repellent impregnation for mineral substrates |
| Visual effect | Colourless protection; natural appearance subject to a trial |
| Approximate consumption | 100–150 ml/m² |
| Approximate coverage | Approximately 6.7–10 m²/l |
| Coats / sequence | 1 or 2; the second applied only wet-on-wet |
| Application method | Spray, roller or brush |
| Application temperature | According to the current product label |
| Protection from water | At least 6 hours after application |
| Service life | Up to 5 years, depending on the substrate and use |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · PAVING PROTECT ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Start by selecting cleaner concentration and testing compatibility. After cleaning, remove residues, rinse as instructed and wait for the material to dry completely.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
ZESTAW DO KOSTKI — Application method
- First wash the paving with the kit’s cleaner, remove residues and dry the substrate. Then carry out a trial and apply the impregnation according to the second component’s instructions.
- Do not mix kit components. Observe the separate concentrations and contact times on their packaging.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Do not mix kit components. Observe the separate concentrations and contact times on their packaging.
Consumption, packs and calculations
Calculate cleaner and impregnation requirements separately from the selected kit’s labels; the product page specifies no single coverage for both stages.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| 5 L impregnation + 5 L cleaner | Establish by trial and from the label |
| 10 L impregnation + 10 L cleaner | Establish by trial and from the label |
| 20 L impregnation + 20 L cleaner | Establish by trial and from the label |
Example for 50 m²
impregnation: Establish by trial and from the label; cleaner: Establish by trial and from the label
Maintenance and limitations
Durability is specified by the impregnation instructions supplied with the particular kit variant.
- Do not apply to dirty, damp, non-absorbent or incompatibly coated surfaces. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
ZESTAW DO KOSTKI — Product questions
Which surfaces is this product intended for?
- block paving compatible with both products
- concrete paving following a trial
What consumption should I use?
Calculate cleaner and impregnation requirements separately from the selected kit’s labels; the product page specifies no single coverage for both stages.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Start by selecting cleaner concentration and testing compatibility. After cleaning, remove residues, rinse as instructed and wait for the material to dry completely.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- First wash the paving with the kit’s cleaner, remove residues and dry the substrate. Then carry out a trial and apply the impregnation according to the second component’s instructions.
- Do not mix kit components. Observe the separate concentrations and contact times on their packaging.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Do not mix kit components. Observe the separate concentrations and contact times on their packaging.
How should durability and renewal be assessed?
Durability is specified by the impregnation instructions supplied with the particular kit variant.
What are the limitations of use?
- Do not apply to dirty, damp, non-absorbent or incompatibly coated surfaces. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Planning your project with ZESTAW DO KOSTKI
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of ZESTAW DO KOSTKI. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying ZESTAW DO KOSTKI, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes ZESTAW DO KOSTKI; it does not replace the instructions supplied with your particular pack.