FORNIR KAMIENNYProtection for thin natural-stone cladding
FORNIR KAMIENNY by NANO-BAU: NANO-BAU FORNIR KAMIENNY is an impregnation for stone veneer. It reduces water absorption in thin natural-stone cladding, allowing protection to be planned around the decorative surface's texture and installation method.
FORNIR KAMIENNY by NANO-BAU: NANO-BAU FORNIR KAMIENNY is an impregnation for stone veneer. It reduces water absorption in thin natural-stone cladding, allowing protection to be planned around the decorative surface's texture and installation method.
FORNIR KAMIENNY — Properties and performance
- Reduces water absorption in thin natural-stone cladding.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Protection for thin natural-stone cladding
Substrates
- natural stone veneer
- flexible stone cladding within the documented scope
- interior decorative walls
- facades using cladding approved for that application
FORNIR KAMIENNY — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-repellent impregnation |
| Visual effect | Natural appearance; assess the final result by trial |
| Approximate consumption | Approximately 40 ml/m² |
| Approximate coverage | Approximately 25 m²/l |
| Coats / sequence | 1; optionally 2, with the second applied only wet-on-wet |
| Application method | Even spraying or manual application as directed on the label |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · FORNIR KAMIENNY ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
FORNIR KAMIENNY — Application method
- Shake. Spray, brush or roll one coat, or two wet-on-wet.
- Clean, dry stone; at least 3 hours without rain.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Clean, dry stone; at least 3 hours without rain.
Consumption, packs and calculations
Approximately 40 ml/m², equivalent to 25 m²/l.
Indicative consumption for compatible veneer; no automatic coat multiplier.
| Pack sizes | Indicative pack coverage |
|---|---|
| 100 ml | 2.5 m² |
| 250 ml | 6.25 m² |
| 500 ml | 12.5 m² |
| 1 L | 25 m² |
| 5 L | 125 m² |
Example for 50 m²
2 l
Maintenance and limitations
Declared durability up to 6 years, depending on service conditions.
- Do not saturate backing layers or adhesive. Do not assume compatibility with every composite veneer or resin coating without a trial. Assess protection on a clean surface and adapt renewal to service conditions.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- natural stone veneer
- flexible stone cladding within the documented scope
What consumption should I use?
Approximately 40 ml/m², equivalent to 25 m²/l.
Indicative consumption for compatible veneer; no automatic coat multiplier.
How should the substrate be prepared?
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Shake. Spray, brush or roll one coat, or two wet-on-wet.
- Clean, dry stone; at least 3 hours without rain.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Clean, dry stone; at least 3 hours without rain.
How should durability and renewal be assessed?
Declared durability up to 6 years, depending on service conditions.
What are the limitations of use?
- Do not saturate backing layers or adhesive. Do not assume compatibility with every composite veneer or resin coating without a trial. Assess protection on a clean surface and adapt renewal to service conditions.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Planning your project with FORNIR KAMIENNY
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of FORNIR KAMIENNY. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying FORNIR KAMIENNY, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes FORNIR KAMIENNY; it does not replace the instructions supplied with your particular pack.