GLASS CARE KITPreparation and water-repellent protection of glass
GLASS CARE KIT by NANO-BAU: NANO-BAU GLASS CARE Kit is a treatment for glass surfaces. CLEAN and COAT prepare and protect glass, helping reduce dirt adhesion on a correctly degreased and polished surface.
GLASS CARE KIT by NANO-BAU: NANO-BAU GLASS CARE Kit is a treatment for glass surfaces. CLEAN and COAT prepare and protect glass, helping reduce dirt adhesion on a correctly degreased and polished surface.
GLASS CARE KIT — Properties and performance
- CLEAN and COAT prepare and protect glass.
- Protection selected for the material and its natural finish.
- Glass preparation and protection in the specified sequence.
Preparation and water-repellent protection of glass
Substrates
- window and facade glass
- greenhouse and conservatory glass
- protection for windows and glazing
- maintenance of large glass surfaces
GLASS CARE KIT — Technical parameters
Document applies to: GLASS CARE KIT
| Parameter | Value |
|---|---|
| Product type | Two components: CLEAN and COAT; contain propan-2-ol |
| Visual effect | Transparent water-repellent coating |
| Approximate consumption | 5–10 ml/m² of the coating alone |
| Approximate coverage | Approximately 100–200 m²/l of the coating alone |
| Coats / sequence | CLEAN, followed by a thin application of COAT |
| Application method | Cloth or suitable mop; separate accessories |
| Protection from water | At least 6 hours |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · GLASS CARE KIT ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
GLASS CARE KIT — Application method
- Apply CLEAN to clean, dry glass using a cloth or mop. Distribute COAT in 1–2 m² areas and polish within 2 minutes. Correct any streaks using CLEAN as instructed.
- At least 6 hours without rain. Avoid strong sunlight and hot glass; do not apply to plastic, rubber, polycarbonate or metal.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
At least 6 hours without rain. Avoid strong sunlight and hot glass; do not apply to plastic, rubber, polycarbonate or metal.
Consumption, packs and calculations
Approximately 5–10 ml/m².
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| 60 ml impregnation + 60 ml cleaner | Establish by trial and from the label |
| 100 ml impregnation + 100 ml cleaner | Establish by trial and from the label |
| 250 ml impregnation + 250 ml cleaner | Establish by trial and from the label |
| 500 ml impregnation + 500 ml cleaner | Establish by trial and from the label |
| 1 L impregnation + 1 L cleaner | Establish by trial and from the label |
| 5 L impregnation + 5 L cleaner | Establish by trial and from the label |
Example for 50 m²
COAT: 0.25–0.5 l; CLEAN: Establish by trial and from the label
Maintenance and limitations
Declared durability up to 5 years, depending on use.
- Do not apply to plastic, rubber, polycarbonate or metal. Confirm compatibility with factory coatings. The product does not remove limescale or repair scratches and does not replace regular cleaning. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- 3 years from the production date. Store locked away in tightly closed original packaging, in a cool, well-ventilated place. Keep away from ignition sources and children. Follow the label’s temperature range.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
H225, H319, H336
Product questions
Which surfaces is this product intended for?
- window and facade glass
- greenhouse and conservatory glass
What consumption should I use?
Approximately 5–10 ml/m².
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Apply CLEAN to clean, dry glass using a cloth or mop. Distribute COAT in 1–2 m² areas and polish within 2 minutes. Correct any streaks using CLEAN as instructed.
- At least 6 hours without rain. Avoid strong sunlight and hot glass; do not apply to plastic, rubber, polycarbonate or metal.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
At least 6 hours without rain. Avoid strong sunlight and hot glass; do not apply to plastic, rubber, polycarbonate or metal.
How should durability and renewal be assessed?
Declared durability up to 5 years, depending on use.
What are the limitations of use?
- Do not apply to plastic, rubber, polycarbonate or metal. Confirm compatibility with factory coatings. The product does not remove limescale or repair scratches and does not replace regular cleaning. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- 3 years from the production date. Store locked away in tightly closed original packaging, in a cool, well-ventilated place. Keep away from ignition sources and children. Follow the label’s temperature range.
Planning your project with GLASS CARE KIT
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of GLASS CARE KIT. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying GLASS CARE KIT, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes GLASS CARE KIT; it does not replace the instructions supplied with your particular pack.