GLASS CARE KIT + SMARTBLONDProtection and routine cleaning of windows and glazing
GLASS CARE KIT + SMARTBLOND by NANO-BAU: The NANO-BAU GLASS CARE kit combines CLEAN degreaser, COAT coating, cloths and SmartBlond fluid for routine glass cleaning. Impregnation makes the surface water-repellent and helps water run off. It helps reduce the adhesion of dirt and deposits and makes subsequent cleaning easier. Apply the products sequentially, because cleaning and protection serve different purposes.
GLASS CARE KIT + SMARTBLOND — Product overview
GLASS CARE KIT + SMARTBLOND by NANO-BAU: The NANO-BAU GLASS CARE kit combines CLEAN degreaser, COAT coating, cloths and SmartBlond fluid for routine glass cleaning. Impregnation makes the surface water-repellent and helps water run off. It helps reduce the adhesion of dirt and deposits and makes subsequent cleaning easier. Apply the products sequentially, because cleaning and protection serve different purposes.
GLASS CARE KIT + SMARTBLOND — Properties and performance
- Water-repellent glass protection.
- Easier subsequent cleaning.
- Reduced deposit adhesion.
- Degreaser and coating in one kit.
- Application and polishing cloths.
Protection and routine cleaning of windows and glazing
Substrates
- Window and facade glass. Do not apply the coating to plastic, rubber, polycarbonate or metal. Confirm compatibility with specially coated glass and solar installations.
- Windows.
- Glass facades.
- Orangeries and conservatories.
- Greenhouses.
- Glass shower elements compatible with the label.
GLASS CARE KIT + SMARTBLOND — Technical parameters
Coating: 5–10 ml/m². The kit description gives approximately 4 m² per 100 ml for SmartBlond fluid; do not apply this rate to the coating.
Polish COAT within 2 minutes of application to each area; at least 6 hours without rain.
Technical documentation
PDF in Polish · GLASS CARE KIT + SMARTBLOND ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Wash and dry the glass. Do not work on hot surfaces or in strong sunlight.
- Carry out a compatibility trial and protect materials not intended for treatment.
GLASS CARE KIT + SMARTBLOND — Application method
- Apply CLEAN to a cloth or mop pad and degrease the previously washed glass.
- Immediately after degreasing, apply COAT with a clean, lightly dampened cloth, working in 1–2 m² areas.
- Polish with clean microfibre within 2 minutes of coating application. Allow at least 6 hours without rain.
- For subsequent cleaning, spread SmartBlond over the surface and wipe with microfibre or an absorbent cloth.
Conditions and drying time
Polish COAT within 2 minutes of application to each area; at least 6 hours without rain.
Consumption, packs and calculations
Coating: 5–10 ml/m². The kit description gives approximately 4 m² per 100 ml for SmartBlond fluid; do not apply this rate to the coating.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| kit 100 ml/100 ml + 750 ml | Establish by trial and from the label |
| kit 30 ml/30 ml + 750 ml | Establish by trial and from the label |
| kit 60 ml/60 ml + 750 ml | Establish by trial and from the label |
Example for 50 m²
COAT: 0.25–0.5 l; CLEAN: Establish by trial and from the label; SmartBlond: 1.25 l
Maintenance and limitations
Declared coating protection up to 5 years, depending on preparation and use. Glass still requires periodic cleaning.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
H225, H319, H336
GLASS CARE KIT + SMARTBLOND — Product questions
Which surfaces is this product intended for?
- Window and facade glass. Do not apply the coating to plastic, rubber, polycarbonate or metal. Confirm compatibility with specially coated glass and solar installations.
What consumption should I use?
Coating: 5–10 ml/m². The kit description gives approximately 4 m² per 100 ml for SmartBlond fluid; do not apply this rate to the coating.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Wash and dry the glass. Do not work on hot surfaces or in strong sunlight.
- Carry out a compatibility trial and protect materials not intended for treatment.
How is the product applied?
- Apply CLEAN to a cloth or mop pad and degrease the previously washed glass.
- Immediately after degreasing, apply COAT with a clean, lightly dampened cloth, working in 1–2 m² areas.
- Polish with clean microfibre within 2 minutes of coating application. Allow at least 6 hours without rain.
- For subsequent cleaning, spread SmartBlond over the surface and wipe with microfibre or an absorbent cloth.
What conditions are needed for drying?
Polish COAT within 2 minutes of application to each area; at least 6 hours without rain.
How should durability and renewal be assessed?
Declared coating protection up to 5 years, depending on preparation and use. Glass still requires periodic cleaning.
What are the limitations of use?
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with GLASS CARE KIT + SMARTBLOND
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of GLASS CARE KIT + SMARTBLOND. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying GLASS CARE KIT + SMARTBLOND, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes GLASS CARE KIT + SMARTBLOND; it does not replace the instructions supplied with your particular pack.