OTOCZAKI I GRYSWater-repellent treatment for decorative garden stones
OTOCZAKI I GRYS by NANO-BAU: NANO-BAU impregnation for pebbles reduces water absorption in decorative stones without deliberately adding gloss. Select protection according to the aggregate size and type of pebbles used in the design.
OTOCZAKI I GRYS by NANO-BAU: NANO-BAU impregnation for pebbles reduces water absorption in decorative stones without deliberately adding gloss. Select protection according to the aggregate size and type of pebbles used in the design.
OTOCZAKI I GRYS — Properties and performance
- Reduces water absorption in decorative stones without deliberately adding gloss.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Water-repellent treatment for decorative garden stones
Substrates
- pebbles and decorative aggregate
- mosaics and approved natural stones
- stone beds and arrangements
- garden decorations and building surroundings
OTOCZAKI I GRYS — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-based water-repellent impregnation |
| Visual effect | Natural appearance; assess the final result by trial |
| Approximate consumption | Approximately 100–143 ml/m² |
| Approximate coverage | 7–10 m²/l |
| Coats / sequence | 1; optionally 2, with the second applied only wet-on-wet |
| Application method | Even spraying or manual application as directed on the label |
| Protection from water | At least 3 hours after application |
| pH | 9 (undiluted product) |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · OTOCZAKI I GRYS ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
OTOCZAKI I GRYS — Application method
- Spray one coat, or two wet-on-wet. Spread or remove excess; rinse tools with water.
- Clean, dry stone; at least 3 hours without rain. Protect plants, glass and steel.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Clean, dry stone; at least 3 hours without rain. Protect plants, glass and steel.
Consumption, packs and calculations
Approximately 7–10 m²/l, depending on aggregate size and absorbency.
Measure the actual stone surface area; consumption depends on aggregate size and absorbency.
| Pack sizes | Indicative pack coverage |
|---|---|
| 1 L | 6.99–10 m² |
| 2 L | 13.99–20 m² |
| 5 L | 34.97–50 m² |
| 10 L | 69.93–100 m² |
| 20 L | 139.86–200 m² |
Example for 50 m²
5–7.15 l
Maintenance and limitations
No single numerical service life is declared for all stones; inspect appearance and water absorption during maintenance.
- The product does not bond stones or stabilise garden beds. Area means the treated stone surfaces, not the ground footprint beneath the aggregate. Assess protection on a clean surface and adapt renewal to service conditions.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- pebbles and decorative aggregate
- mosaics and approved natural stones
What consumption should I use?
Approximately 7–10 m²/l, depending on aggregate size and absorbency.
Measure the actual stone surface area; consumption depends on aggregate size and absorbency.
How should the substrate be prepared?
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Spray one coat, or two wet-on-wet. Spread or remove excess; rinse tools with water.
- Clean, dry stone; at least 3 hours without rain. Protect plants, glass and steel.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Clean, dry stone; at least 3 hours without rain. Protect plants, glass and steel.
How should durability and renewal be assessed?
No single numerical service life is declared for all stones; inspect appearance and water absorption during maintenance.
What are the limitations of use?
- The product does not bond stones or stabilise garden beds. Area means the treated stone surfaces, not the ground footprint beneath the aggregate. Assess protection on a clean surface and adapt renewal to service conditions.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Planning your project with OTOCZAKI I GRYS
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of OTOCZAKI I GRYS. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying OTOCZAKI I GRYS, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes OTOCZAKI I GRYS; it does not replace the instructions supplied with your particular pack.