NANOWOOD UNIColourless protection for natural wood
NANOWOOD UNI by NANO-BAU: NANO-BAU NANOWOOD UNI is a colourless impregnation for natural wood. It reduces water absorption in untreated wood while retaining its natural appearance, offering an alternative to oiling when colour enhancement is not the aim.
NANOWOOD UNI by NANO-BAU: NANO-BAU NANOWOOD UNI is a colourless impregnation for natural wood. It reduces water absorption in untreated wood while retaining its natural appearance, offering an alternative to oiling when colour enhancement is not the aim.
NANOWOOD UNI — Properties and performance
- Reduces water absorption in untreated wood while retaining its natural appearance.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Colourless protection for natural wood
Substrates
- untreated, unvarnished wood
- stained wood following a compatibility trial
- cladding and log buildings
- garden furniture, fences and gazebos
NANOWOOD UNI — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-based silane impregnation |
| Visual effect | Natural appearance; assess the final result by trial |
| Approximate consumption | 60–100 ml/m² for one coat |
| Approximate coverage | Approximately 10–16.7 m²/l |
| Coats / sequence | 1 even coat; no dilution |
| Application method | Brush, roller, low-pressure spray, sprayer or immersion |
| Application temperature | +5°C to +40°C |
| Protection from water | Approximately 4 hours |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · NANOWOOD UNI ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the wood thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
NANOWOOD UNI — Application method
- Apply one coat of the ready-to-use product to clean, dry wood by spray, brush, roller or immersion.
- Temperature +5 to +40°C. Check the current label for protection from water.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Temperature +5 to +40°C. Check the current label for protection from water.
Consumption, packs and calculations
Approximately 10–16.7 m²/l for one coat (consumption 60–100 ml/m²), depending on wood absorbency.
One coat; do not dilute the product.
| Pack sizes | Indicative pack coverage |
|---|---|
| 250 ml | 2.5–4.17 m² |
| 500 ml | 5–8.33 m² |
| 1 L | 10–16.67 m² |
| 5 L | 50–83.33 m² |
| 10 L | 100–166.67 m² |
| 20 L | 200–333.33 m² |
Example for 50 m²
3–5 l
Maintenance and limitations
Declared durability approximately 3–5 years, depending on exposure and use.
- An oil treatment is recommended for decking and floors. Do not apply over varnish or incompatible coatings. It does not remove existing mould, blue stain or rot. Assess the colour on a dried trial area. Inspect protection on a clean surface and adapt renewal to service conditions.
Storage and safety
- 3 years from the production date. Store tightly closed in a dry, ventilated place at +5°C to +30°C. Protect from frost and overheating.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- untreated, unvarnished wood
- stained wood following a compatibility trial
What consumption should I use?
Approximately 10–16.7 m²/l for one coat (consumption 60–100 ml/m²), depending on wood absorbency.
One coat; do not dilute the product.
How should the substrate be prepared?
- Clean the wood thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Apply one coat of the ready-to-use product to clean, dry wood by spray, brush, roller or immersion.
- Temperature +5 to +40°C. Check the current label for protection from water.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Temperature +5 to +40°C. Check the current label for protection from water.
How should durability and renewal be assessed?
Declared durability approximately 3–5 years, depending on exposure and use.
What are the limitations of use?
- An oil treatment is recommended for decking and floors. Do not apply over varnish or incompatible coatings. It does not remove existing mould, blue stain or rot. Assess the colour on a dried trial area. Inspect protection on a clean surface and adapt renewal to service conditions.
How should the product be stored?
- 3 years from the production date. Store tightly closed in a dry, ventilated place at +5°C to +30°C. Protect from frost and overheating.
Planning your project with NANOWOOD UNI
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of NANOWOOD UNI. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying NANOWOOD UNI, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes NANOWOOD UNI; it does not replace the instructions supplied with your particular pack.