SHOWER CARE KITWater-repellent protection for shower glass
SHOWER CARE KIT by NANO-BAU: NANO-BAU SHOWER CARE Kit is a water-repellent coating system for showers. It combines preparation with CLEAN and protection with COAT, making subsequent care of glass shower walls easier alongside regular removal of water and deposits.
SHOWER CARE KIT by NANO-BAU: NANO-BAU SHOWER CARE Kit is a water-repellent coating system for showers. It combines preparation with CLEAN and protection with COAT, making subsequent care of glass shower walls easier alongside regular removal of water and deposits.
SHOWER CARE KIT — Properties and performance
- Combines glass preparation with CLEAN and protection with COAT.
- Protection selected for the material and its natural finish.
- Glass preparation and protection in the specified sequence.
Water-repellent protection for shower glass
Substrates
- shower enclosure glass
- glazed ceramics approved in the instructions
- glass protection in bathrooms
- renewal of protection after thorough cleaning
SHOWER CARE KIT — Technical parameters
Document applies to: SHOWER CARE KIT
| Parameter | Value |
|---|---|
| Product type | Kit: preparation product and separate coating |
| Visual effect | Transparent, water-repellent finish |
| Approximate consumption | 5–10 ml/m² of the coating alone |
| Approximate coverage | Approximately 100–200 m²/l of the coating alone |
| Coats / sequence | Substrate preparation, followed by a thin coating application |
| Application method | Clean cloth / microfibre; separate accessories for each stage |
| Protection from water | At least 6 hours without contact with water |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · SHOWER CARE KIT ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
SHOWER CARE KIT — Application method
- Wash, descale and dry the glass. Shake CLEAN, spread with a sponge and remove the white powder with paper without rinsing. Apply COAT with a cloth to 1–2 m² areas and polish within 2 minutes.
- At least 6 hours without water. Do not use on plastic, rubber, polycarbonate or metal.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
At least 6 hours without water. Do not use on plastic, rubber, polycarbonate or metal.
Consumption, packs and calculations
Approximately 5–10 ml/m².
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| 60 ml impregnation + 60 ml cleaner | Establish by trial and from the label |
| 100 ml impregnation + 100 ml cleaner | Establish by trial and from the label |
| 250 ml impregnation + 250 ml cleaner | Establish by trial and from the label |
| 500 ml impregnation + 500 ml cleaner | Establish by trial and from the label |
| 1 L impregnation + 1 L cleaner | Establish by trial and from the label |
Example for 50 m²
COAT: 0.25–0.5 l; CLEAN: Establish by trial and from the label
Maintenance and limitations
Declared durability up to 3 years, depending on maintenance.
- Do not apply to plastic, rubber, polycarbonate or metal. Confirm compatibility with factory coatings. The product does not remove limescale or repair scratches and does not replace regular cleaning. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- shower enclosure glass
- glazed ceramics approved in the instructions
What consumption should I use?
Approximately 5–10 ml/m².
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Wash the surface and remove deposits with a cleaner suitable for glass. Dry thoroughly, then carry out the CLEAN stage according to the kit instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Wash, descale and dry the glass. Shake CLEAN, spread with a sponge and remove the white powder with paper without rinsing. Apply COAT with a cloth to 1–2 m² areas and polish within 2 minutes.
- At least 6 hours without water. Do not use on plastic, rubber, polycarbonate or metal.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
At least 6 hours without water. Do not use on plastic, rubber, polycarbonate or metal.
How should durability and renewal be assessed?
Declared durability up to 3 years, depending on maintenance.
What are the limitations of use?
- Do not apply to plastic, rubber, polycarbonate or metal. Confirm compatibility with factory coatings. The product does not remove limescale or repair scratches and does not replace regular cleaning. Assess protection on a clean surface and adapt renewal to service conditions.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place, protected from overheating. Follow the label’s temperature requirements.
Planning your project with SHOWER CARE KIT
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of SHOWER CARE KIT. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying SHOWER CARE KIT, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes SHOWER CARE KIT; it does not replace the instructions supplied with your particular pack.