STONE ANTISTAINProtection for compatible stone against oily stains
STONE ANTISTAIN by NANO-BAU: NANO-BAU STONE ANTISTAIN provides water- and oil-repellent protection for suitably selected stone. It is intended for areas where limiting penetration by liquids and greasy dirt is important.
STONE ANTISTAIN by NANO-BAU: NANO-BAU STONE ANTISTAIN provides water- and oil-repellent protection for suitably selected stone. It is intended for areas where limiting penetration by liquids and greasy dirt is important.
STONE ANTISTAIN — Properties and performance
- Provides water- and oil-repellent protection for suitably selected stone.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Protection for compatible stone against oily stains
Substrates
- granite, marble, travertine, basalt and onyx
- sandstone, limestone, slate, quartzite and approved engineered stone
- floors, worktops and window sills
- decorative stone and memorial elements
STONE ANTISTAIN — Technical parameters
The application instructions specify approximately 35–50 ml/m² for each of two coats; absorbency and finish must be tested.
Temperature +0 to +40°C; at least approximately 4 hours without rain. Do not spray near flames.
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
STONE ANTISTAIN — Application method
- Apply undiluted in two thin coats at least 30 minutes apart. Polish and remove excess on polished stone.
- Temperature +0 to +40°C; at least approximately 4 hours without rain. Do not spray near flames.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Temperature +0 to +40°C; at least approximately 4 hours without rain. Do not spray near flames.
Consumption, packs and calculations
The application instructions specify approximately 35–50 ml/m² for each of two coats; absorbency and finish must be tested.
Two coats of 35–50 ml/m²; the stated total includes both applications.
| Pack sizes | Indicative pack coverage |
|---|---|
| 100 ml | 1–1.43 m² |
| 250 ml | 2.5–3.57 m² |
| 500 ml | 5–7.14 m² |
| 1 L | 10–14.29 m² |
| 5 L | 50–71.43 m² |
Example for 50 m²
3.5–5 l
Maintenance and limitations
Approximately 3–5 years; assess renewal after approximately 2 years in heavily used areas.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- granite, marble, travertine, basalt and onyx
- sandstone, limestone, slate, quartzite and approved engineered stone
What consumption should I use?
The application instructions specify approximately 35–50 ml/m² for each of two coats; absorbency and finish must be tested.
Two coats of 35–50 ml/m²; the stated total includes both applications.
How should the substrate be prepared?
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Apply undiluted in two thin coats at least 30 minutes apart. Polish and remove excess on polished stone.
- Temperature +0 to +40°C; at least approximately 4 hours without rain. Do not spray near flames.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Temperature +0 to +40°C; at least approximately 4 hours without rain. Do not spray near flames.
How should durability and renewal be assessed?
Approximately 3–5 years; assess renewal after approximately 2 years in heavily used areas.
What are the limitations of use?
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with STONE ANTISTAIN
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of STONE ANTISTAIN. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying STONE ANTISTAIN, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes STONE ANTISTAIN; it does not replace the instructions supplied with your particular pack.