MOKRA KOSTKA + SPECIALCHEMCleaning and wet-look protection of pigmented paving
MOKRA KOSTKA + SPECIALCHEM by NANO-BAU: For a wet-look finish on paving, follow the sequence of cleaning, rinsing, drying and impregnation. BRUK CLEAN + NANO-BAU Mokra Kostka provides separate products for both stages.
MOKRA KOSTKA + SPECIALCHEM — Product overview
MOKRA KOSTKA + SPECIALCHEM by NANO-BAU: For a wet-look finish on paving, follow the sequence of cleaning, rinsing, drying and impregnation. BRUK CLEAN + NANO-BAU Mokra Kostka provides separate products for both stages.
MOKRA KOSTKA + SPECIALCHEM — Properties and performance
- Cleaning and wet-look protection of pigmented paving
Cleaning and wet-look protection of pigmented paving
Substrates
- Relevant substrates include compatible concrete paving after a trial of the finish. Also assess joints, coatings and adjacent elements. Mark out a trial area, record product consumption and inspect the result before continuing with the remaining work.
- Relevant substrates include compatible concrete paving after a trial of the finish. Also assess joints, coatings and adjacent elements. Mark out a trial area, record product consumption and inspect the result before continuing with the remaining work.
MOKRA KOSTKA + SPECIALCHEM — Technical parameters
Cleaner: approximately 8–15 m²/l under the specified solution conditions. Impregnation: follow the supplied variant’s label; calculate both components separately.
Do not apply the wet-look variant to uncoloured grey paving. Observe the label’s required water-free period after impregnation.
Technical documentation
PDF in Polish · MOKRA KOSTKA + SPECIALCHEM ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Start by selecting cleaner concentration and testing compatibility. After cleaning, remove residues, rinse as instructed and wait for the material to dry completely.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
MOKRA KOSTKA + SPECIALCHEM — Application method
- Apply cleaner to lightly pre-wetted paving: concentrate or 1:2 depending on soiling, approximately 10 minutes without drying, then rinse. Once fully dry, carry out a trial and apply the impregnation according to its label.
- Do not apply the wet-look variant to uncoloured grey paving. Observe the label’s required water-free period after impregnation.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Do not apply the wet-look variant to uncoloured grey paving. Observe the label’s required water-free period after impregnation.
Consumption, packs and calculations
Cleaner: approximately 8–15 m²/l under the specified solution conditions. Impregnation: follow the supplied variant’s label; calculate both components separately.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| 2 L impregnation + 2 L cleaner | Establish by trial and from the label |
| 5 L impregnation + 5 L cleaner | Establish by trial and from the label |
| 10 L impregnation + 10 L cleaner | Establish by trial and from the label |
| 20 L impregnation + 20 L cleaner | Establish by trial and from the label |
Example for 50 m²
MOKRA KOSTKA: Establish by trial and from the label; BRUK CLEAN: Establish by trial and from the label
Maintenance and limitations
No single numerical service life is stated for all applications. Assess surface condition and retreatment needs according to use.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
H304, H315, H318, H319
MOKRA KOSTKA + SPECIALCHEM — Product questions
Which surfaces is this product intended for?
- Relevant substrates include compatible concrete paving after a trial of the finish. Also assess joints, coatings and adjacent elements. Mark out a trial area, record product consumption and inspect the result before continuing with the remaining work.
What consumption should I use?
Cleaner: approximately 8–15 m²/l under the specified solution conditions. Impregnation: follow the supplied variant’s label; calculate both components separately.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Start by selecting cleaner concentration and testing compatibility. After cleaning, remove residues, rinse as instructed and wait for the material to dry completely.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Apply cleaner to lightly pre-wetted paving: concentrate or 1:2 depending on soiling, approximately 10 minutes without drying, then rinse. Once fully dry, carry out a trial and apply the impregnation according to its label.
- Do not apply the wet-look variant to uncoloured grey paving. Observe the label’s required water-free period after impregnation.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Do not apply the wet-look variant to uncoloured grey paving. Observe the label’s required water-free period after impregnation.
How should durability and renewal be assessed?
No single numerical service life is stated for all applications. Assess surface condition and retreatment needs according to use.
What are the limitations of use?
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with MOKRA KOSTKA + SPECIALCHEM
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of MOKRA KOSTKA + SPECIALCHEM. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying MOKRA KOSTKA + SPECIALCHEM, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes MOKRA KOSTKA + SPECIALCHEM; it does not replace the instructions supplied with your particular pack.