ANTIALG CLEANERRemoval of green deposits
ANTIALG CLEANER by NANO-BAU: NANO-BAU ANTIALG CLEANER removes green deposits from suitably selected building surfaces. Its foaming formula helps distribute the cleaner over the affected area.
ANTIALG CLEANER by NANO-BAU: NANO-BAU ANTIALG CLEANER removes green deposits from suitably selected building surfaces. Its foaming formula helps distribute the cleaner over the affected area.
ANTIALG CLEANER — Properties and performance
- For removing green deposits from suitably selected building surfaces.
- Cleaning can be carried out separately from subsequent surface protection.
- Defined preparation and trial procedures help assess the result.
Removal of green deposits
Substrates
- stone, concrete and paving compatible with the label
- brick, facades and roof coverings following a compatibility trial
- removal of green deposits
- surface preparation for further maintenance
ANTIALG CLEANER — Technical parameters
Establish consumption by trial and follow the current label; the product page gives no confirmed coverage in m²/l.
Do not adopt contact times from other cleaners. Protect adjacent materials and do not mix chemicals.
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Remove loose dirt, protect adjacent elements and select preparation and pre-wetting methods according to this product’s instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
ANTIALG CLEANER — Application method
- Following the trial, apply to the dirty surface as directed on the label. Select concentration, contact time and residue removal method from the packaging instructions.
- Do not adopt contact times from other cleaners. Protect adjacent materials and do not mix chemicals.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Do not adopt contact times from other cleaners. Protect adjacent materials and do not mix chemicals.
Consumption, packs and calculations
Establish consumption by trial and follow the current label; the product page gives no confirmed coverage in m²/l.
Confirm consumption on a representative trial area; do not assume rates from similar products.
| Pack sizes | Indicative pack coverage |
|---|---|
| 750 ml | Establish by trial and from the label |
| 2 L | Establish by trial and from the label |
| 5 L | Establish by trial and from the label |
| 10 L | Establish by trial and from the label |
| 20 L | Establish by trial and from the label |
Example for 50 m²
No universal conversion applies. Establish the quantity for the particular process and substrate.
Maintenance and limitations
Cleaning removes existing deposits. Repeat treatment according to exposure and renewed soiling.
- First test compatibility in an inconspicuous area. Cleaning does not create a durable protective impregnation.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- stone, concrete and paving compatible with the label
- brick, facades and roof coverings following a compatibility trial
What consumption should I use?
Establish consumption by trial and follow the current label; the product page gives no confirmed coverage in m²/l.
Confirm consumption on a representative trial area; do not assume rates from similar products.
How should the substrate be prepared?
- Remove loose dirt, protect adjacent elements and select preparation and pre-wetting methods according to this product’s instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Following the trial, apply to the dirty surface as directed on the label. Select concentration, contact time and residue removal method from the packaging instructions.
- Do not adopt contact times from other cleaners. Protect adjacent materials and do not mix chemicals.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Do not adopt contact times from other cleaners. Protect adjacent materials and do not mix chemicals.
How should durability and renewal be assessed?
Cleaning removes existing deposits. Repeat treatment according to exposure and renewed soiling.
What are the limitations of use?
- First test compatibility in an inconspicuous area. Cleaning does not create a durable protective impregnation.
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with ANTIALG CLEANER
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of ANTIALG CLEANER. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying ANTIALG CLEANER, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes ANTIALG CLEANER; it does not replace the instructions supplied with your particular pack.