CEGŁA RĘCZNIE FORMOWANAWater-repellent treatment for porous brickwork
CEGŁA RĘCZNIE FORMOWANA by NANO-BAU: NANO-BAU Cegła Ręcznie Formowana is a water-based treatment for porous brick that retains its matt character. Even preparation and application are essential on facades and uneven brickwork. The documentation specifies spraying; work on details must follow the current label.
CEGŁA RĘCZNIE FORMOWANA by NANO-BAU: NANO-BAU Cegła Ręcznie Formowana is a water-based treatment for porous brick that retains its matt character. Even preparation and application are essential on facades and uneven brickwork. The documentation specifies spraying; work on details must follow the current label.
CEGŁA RĘCZNIE FORMOWANA — Properties and performance
- Water-repellent treatment for porous brickwork
Water-repellent treatment for porous brickwork
Substrates
- Handmade brick, suitably prepared reclaimed brick and compatible brick slips
CEGŁA RĘCZNIE FORMOWANA — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-based water-repellent impregnation |
| Visual effect | Natural appearance; assess the final result by trial |
| Approximate consumption | 100–150 ml/m² |
| Approximate coverage | Approximately 6.7–10 m²/l |
| Coats / sequence | 1; optionally 2, with the second applied only wet-on-wet |
| Application method | Even spraying; treat details as directed on the label |
| Application temperature | Above +5°C |
| pH | 9 (undiluted) |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · CEGŁA RĘCZNIE FORMOWANA ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Check the stability of bricks and joints, salts and previous treatments. New and suitably prepared reclaimed bricks may need different cleaning. Include recesses, projections and mortar in the trial area. Record the result after drying; impregnation does not repair weak material or conceal damage.
- Work on completely dry material, above +5°C. Distribute evenly without pooling in recesses or running over joints. If a second coat is necessary, apply before the first dries. Verify the indicative 100–150 ml/m² by trial, accounting for spray losses and the actual texture.
CEGŁA RĘCZNIE FORMOWANA — Application method
- Check the stability of bricks and joints, salts and previous treatments. New and suitably prepared reclaimed bricks may need different cleaning. Include recesses, projections and mortar in the trial area. Record the result after drying; impregnation does not repair weak material or conceal damage.
- Work on completely dry material, above +5°C. Distribute evenly without pooling in recesses or running over joints. If a second coat is necessary, apply before the first dries. Verify the indicative 100–150 ml/m² by trial, accounting for spray losses and the actual texture.
Conditions and drying time
Above +5°C; protect from water for the period specified on the current label.
Consumption, packs and calculations
100–150 ml/m², approximately 6.7–10 m²/l
Confirm consumption on the bricks and joints; do not apply an automatic coat multiplier.
| Pack sizes | Indicative pack coverage |
|---|---|
| 1 L | 6.67–10 m² |
| 2 L | 13.33–20 m² |
| 5 L | 33.33–50 m² |
| 10 L | 66.67–100 m² |
| 20 L | 133.33–200 m² |
Example for 50 m²
5–7.5 l
Maintenance and limitations
No single numerical service life is stated for all applications. Assess surface condition and retreatment needs according to use.
- Use on absorbent, unglazed ceramics. Do not apply over varnish, glaze or incompatible previous coatings. It does not replace joint repair, salt removal or waterproofing. Assess protection on a clean surface and adapt renewal to service conditions.
- Apply to clean, completely dry, absorbent material. Impregnation does not fill cracks, remove salts or replace joint repair or waterproofing. Do not coat glaze, varnish or incompatible coatings. Follow the current label’s water-protection period.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- Handmade brick, suitably prepared reclaimed brick and compatible brick slips
What consumption should I use?
100–150 ml/m², approximately 6.7–10 m²/l
Confirm consumption on the bricks and joints; do not apply an automatic coat multiplier.
How should the substrate be prepared?
- Check the stability of bricks and joints, salts and previous treatments. New and suitably prepared reclaimed bricks may need different cleaning. Include recesses, projections and mortar in the trial area. Record the result after drying; impregnation does not repair weak material or conceal damage.
- Work on completely dry material, above +5°C. Distribute evenly without pooling in recesses or running over joints. If a second coat is necessary, apply before the first dries. Verify the indicative 100–150 ml/m² by trial, accounting for spray losses and the actual texture.
How is the product applied?
- Check the stability of bricks and joints, salts and previous treatments. New and suitably prepared reclaimed bricks may need different cleaning. Include recesses, projections and mortar in the trial area. Record the result after drying; impregnation does not repair weak material or conceal damage.
- Work on completely dry material, above +5°C. Distribute evenly without pooling in recesses or running over joints. If a second coat is necessary, apply before the first dries. Verify the indicative 100–150 ml/m² by trial, accounting for spray losses and the actual texture.
What conditions are needed for drying?
Above +5°C; protect from water for the period specified on the current label.
How should durability and renewal be assessed?
No single numerical service life is stated for all applications. Assess surface condition and retreatment needs according to use.
What are the limitations of use?
- Use on absorbent, unglazed ceramics. Do not apply over varnish, glaze or incompatible previous coatings. It does not replace joint repair, salt removal or waterproofing. Assess protection on a clean surface and adapt renewal to service conditions.
- Apply to clean, completely dry, absorbent material. Impregnation does not fill cracks, remove salts or replace joint repair or waterproofing. Do not coat glaze, varnish or incompatible coatings. Follow the current label’s water-protection period.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Planning your project with CEGŁA RĘCZNIE FORMOWANA
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of CEGŁA RĘCZNIE FORMOWANA. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying CEGŁA RĘCZNIE FORMOWANA, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes CEGŁA RĘCZNIE FORMOWANA; it does not replace the instructions supplied with your particular pack.