PAVING CLEANERCleaning block paving
PAVING CLEANER by NANO-BAU: A concentrate for cleaning block paving that helps remove in-service dirt and plant residues. It prepares paving for a suitably selected impregnation.
PAVING CLEANER — Product overview
PAVING CLEANER by NANO-BAU: A concentrate for cleaning block paving that helps remove in-service dirt and plant residues. It prepares paving for a suitably selected impregnation.
PAVING CLEANER — Properties and performance
- Helps remove in-service dirt and plant residues from paving.
- Cleaning can be carried out separately from subsequent surface protection.
- Defined preparation and trial procedures help assess the result.
Cleaning block paving
Substrates
- concrete and tumbled paving
- clay paving after confirmation of compatibility
- cleaning driveways and car parks
- cleaning paths and terraces
PAVING CLEANER — Technical parameters
Establish consumption by trial at the chosen concentration. Confirm current coverage on the label, as it depends on soiling and working technique.
Select pressure according to the condition of paving and joints. Keep away from children and store locked away.
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Remove loose dirt, protect adjacent elements and select preparation and pre-wetting methods according to this product’s instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
PAVING CLEANER — Application method
- Apply concentrate or a 1:2 solution to a lightly pre-wetted surface, depending on soiling. Leave for approximately 10 minutes without allowing it to dry, then rinse thoroughly.
- Select pressure according to the condition of paving and joints. Keep away from children and store locked away.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Select pressure according to the condition of paving and joints. Keep away from children and store locked away.
Consumption, packs and calculations
Establish consumption by trial at the chosen concentration. Confirm current coverage on the label, as it depends on soiling and working technique.
Confirm consumption on a representative trial area; do not assume rates from similar products.
| Pack sizes | Indicative pack coverage |
|---|---|
| 1 L | Establish by trial and from the label |
| 2 L | Establish by trial and from the label |
| 5 L | Establish by trial and from the label |
| 10 L | Establish by trial and from the label |
| 20 L | Establish by trial and from the label |
Example for 50 m²
No universal conversion applies. Establish the quantity for the particular process and substrate.
Maintenance and limitations
The effect is removal of existing dirt. The product does not replace impregnation.
- First test compatibility in an inconspicuous area. Cleaning does not create a durable protective impregnation.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
PAVING CLEANER — Product questions
Which surfaces is this product intended for?
- concrete and tumbled paving
- clay paving after confirmation of compatibility
What consumption should I use?
Establish consumption by trial at the chosen concentration. Confirm current coverage on the label, as it depends on soiling and working technique.
Confirm consumption on a representative trial area; do not assume rates from similar products.
How should the substrate be prepared?
- Remove loose dirt, protect adjacent elements and select preparation and pre-wetting methods according to this product’s instructions.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Apply concentrate or a 1:2 solution to a lightly pre-wetted surface, depending on soiling. Leave for approximately 10 minutes without allowing it to dry, then rinse thoroughly.
- Select pressure according to the condition of paving and joints. Keep away from children and store locked away.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Select pressure according to the condition of paving and joints. Keep away from children and store locked away.
How should durability and renewal be assessed?
The effect is removal of existing dirt. The product does not replace impregnation.
What are the limitations of use?
- First test compatibility in an inconspicuous area. Cleaning does not create a durable protective impregnation.
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with PAVING CLEANER
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of PAVING CLEANER. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying PAVING CLEANER, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes PAVING CLEANER; it does not replace the instructions supplied with your particular pack.