PAVING PROTECTWater-repellent protection for block paving
PAVING PROTECT by NANO-BAU: A colourless impregnation for block paving that reduces water absorption and makes subsequent maintenance easier. It is intended for retaining the paving's existing colour.
PAVING PROTECT by NANO-BAU: A colourless impregnation for block paving that reduces water absorption and makes subsequent maintenance easier. It is intended for retaining the paving's existing colour.
PAVING PROTECT — Properties and performance
- Reduces water absorption in block paving and makes subsequent maintenance easier.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Water-repellent protection for block paving
Substrates
- concrete block paving, excluding exposed-aggregate paving
- tumbled paving, palisades and kerbs
- driveways, footpaths and car parks
- terraces and paths
PAVING PROTECT — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-repellent impregnation for mineral substrates |
| Visual effect | Colourless protection; natural appearance subject to a trial |
| Approximate consumption | 100–150 ml/m² |
| Approximate coverage | Approximately 6.7–10 m²/l |
| Coats / sequence | 1 or 2; the second applied only wet-on-wet |
| Application method | Spray, roller or brush |
| Application temperature | According to the current product label |
| Protection from water | At least 6 hours after application |
| Service life | Up to 5 years, depending on the substrate and use |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · PAVING PROTECT ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
PAVING PROTECT — Application method
- Spray, brush or roller; apply one coat, or two wet-on-wet, to a clean, dry substrate.
- At least 6 hours without rain. Protect glass and aluminium from contact with the product.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
At least 6 hours without rain. Protect glass and aluminium from contact with the product.
Consumption, packs and calculations
Approximately 100–150 ml/m².
Complete treatment; any second application must be wet-on-wet.
| Pack sizes | Indicative pack coverage |
|---|---|
| 1 L | 6.67–10 m² |
| 2 L | 13.33–20 m² |
| 5 L | 33.33–50 m² |
| 10 L | 66.67–100 m² |
| 20 L | 133.33–200 m² |
Example for 50 m²
5–7.5 l
Maintenance and limitations
Declared durability up to 5 years, depending on use.
- Do not apply to dirty, damp, non-absorbent or incompatibly coated surfaces. Assess protection on a clean surface and adapt renewal to service conditions.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- concrete block paving, excluding exposed-aggregate paving
- tumbled paving, palisades and kerbs
What consumption should I use?
Approximately 100–150 ml/m².
Complete treatment; any second application must be wet-on-wet.
How should the substrate be prepared?
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Spray, brush or roller; apply one coat, or two wet-on-wet, to a clean, dry substrate.
- At least 6 hours without rain. Protect glass and aluminium from contact with the product.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
At least 6 hours without rain. Protect glass and aluminium from contact with the product.
How should durability and renewal be assessed?
Declared durability up to 5 years, depending on use.
What are the limitations of use?
- Do not apply to dirty, damp, non-absorbent or incompatibly coated surfaces. Assess protection on a clean surface and adapt renewal to service conditions.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Planning your project with PAVING PROTECT
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of PAVING PROTECT. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying PAVING PROTECT, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes PAVING PROTECT; it does not replace the instructions supplied with your particular pack.