PŁYTKA GIPSOWAImpregnation of absorbent gypsum tiles
PŁYTKA GIPSOWA by NANO-BAU: NANO-BAU PŁYTKA GIPSOWA is an impregnation for decorative gypsum tiles. It reduces water absorption in absorbent gypsum decorations and helps protect wall texture without deliberately giving it a varnished finish.
PŁYTKA GIPSOWA by NANO-BAU: NANO-BAU PŁYTKA GIPSOWA is an impregnation for decorative gypsum tiles. It reduces water absorption in absorbent gypsum decorations and helps protect wall texture without deliberately giving it a varnished finish.
PŁYTKA GIPSOWA — Properties and performance
- Reduces water absorption in absorbent gypsum decorations.
- Protection selected for the material and its natural finish.
- Defined preparation and trial procedures help assess the result.
Impregnation of absorbent gypsum tiles
Substrates
- absorbent, unvarnished gypsum tiles
- decorative gypsum casts
- decorative walls
- gypsum details and figures
PŁYTKA GIPSOWA — Technical parameters
| Parameter | Value |
|---|---|
| Product type | Water-based water-repellent impregnation |
| Visual effect | Natural appearance; assess the final result by trial |
| Approximate consumption | 100–150 ml/m² for one coat |
| Approximate coverage | Approximately 6.7–10 m²/l |
| Coats / sequence | 1 coat |
| Application method | Spray, sprayer or HVLP; brush or roller on details following a trial |
| Shelf life | 3 years from the production date |
Technical documentation
PDF in Polish · PŁYTKA GIPSOWA ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
PŁYTKA GIPSOWA — Application method
- Spray only one coat onto a clean, dry substrate.
- Do not add a second coat without the manufacturer’s instruction. Impregnation does not change the gypsum material’s approved scope of use.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
Conditions and drying time
Do not add a second coat without the manufacturer’s instruction. Impregnation does not change the gypsum material’s approved scope of use.
Consumption, packs and calculations
Approximately 0.1–0.15 l/m².
One coat; do not multiply by additional coats.
| Pack sizes | Indicative pack coverage |
|---|---|
| 500 ml | 3.33–5 m² |
| 1 L | 6.67–10 m² |
| 2 L | 13.33–20 m² |
| 5 L | 33.33–50 m² |
| 10 L | 66.67–100 m² |
Example for 50 m²
5–7.5 l
Maintenance and limitations
Declared durability up to 6 years, depending on the substrate and use.
- Do not use on varnished cladding. Impregnation does not make indoor gypsum suitable for facades, flooding or shower spray zones. Outdoor use is limited to products approved for those conditions by their manufacturer. Assess protection on a clean surface and adapt renewal to service conditions.
Storage and safety
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
Product questions
Which surfaces is this product intended for?
- absorbent, unvarnished gypsum tiles
- decorative gypsum casts
What consumption should I use?
Approximately 0.1–0.15 l/m².
One coat; do not multiply by additional coats.
How should the substrate be prepared?
- Clean the surface thoroughly, remove cleaning residues and allow it to dry. Assess existing coatings and absorbency before applying protection.
- Carry out a compatibility trial and assess the complete result before treating a larger area.
How is the product applied?
- Spray only one coat onto a clean, dry substrate.
- Do not add a second coat without the manufacturer’s instruction. Impregnation does not change the gypsum material’s approved scope of use.
- After treatment, check the uniformity of the result and follow the conditions for subsequent use stated on the label.
What conditions are needed for drying?
Do not add a second coat without the manufacturer’s instruction. Impregnation does not change the gypsum material’s approved scope of use.
How should durability and renewal be assessed?
Declared durability up to 6 years, depending on the substrate and use.
What are the limitations of use?
- Do not use on varnished cladding. Impregnation does not make indoor gypsum suitable for facades, flooding or shower spray zones. Outdoor use is limited to products approved for those conditions by their manufacturer. Assess protection on a clean surface and adapt renewal to service conditions.
How should the product be stored?
- 3 years from the production date. Store in tightly closed original packaging in a dry, ventilated place. Protect from frost, overheating and access by children.
Planning your project with PŁYTKA GIPSOWA
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of PŁYTKA GIPSOWA. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying PŁYTKA GIPSOWA, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes PŁYTKA GIPSOWA; it does not replace the instructions supplied with your particular pack.