SHOWER CARE KIT + SMARTBLONDCleaning and protection of bathroom glass and ceramics
SHOWER CARE KIT + SMARTBLOND by NANO-BAU: The NANO-BAU SHOWER CARE and SmartBlond Czysty prysznic kit combines cleaning with water-repellent surface protection. CLEAN cream prepares previously cleaned glass, while COAT forms the protective layer. Application and polishing cloths are included. SmartBlond fluid removes soap deposits, limescale and everyday dirt.
SHOWER CARE KIT + SMARTBLOND — Product overview
SHOWER CARE KIT + SMARTBLOND by NANO-BAU: The NANO-BAU SHOWER CARE and SmartBlond Czysty prysznic kit combines cleaning with water-repellent surface protection. CLEAN cream prepares previously cleaned glass, while COAT forms the protective layer. Application and polishing cloths are included. SmartBlond fluid removes soap deposits, limescale and everyday dirt.
SHOWER CARE KIT + SMARTBLOND — Properties and performance
- Cleaning and protection in one kit.
- Degreasing before application.
- Water-repellent finish.
- Reduced deposit adhesion.
- Application accessories.
Cleaning and protection of bathroom glass and ceramics
Substrates
- Shower glass and glazed ceramics. The coating is not intended for plastic, rubber, polycarbonate or metal. Check the cleaner’s scope separately from the coating’s scope.
- Glass shower walls and doors.
- Glazed ceramic tiles.
- Ceramic washbasins.
- Ceramic shower trays.
- Ceramic bidets and toilets compatible with the label.
SHOWER CARE KIT + SMARTBLOND — Technical parameters
Coating: 5–10 ml/m². The product page gives no numerical coverage for SmartBlond fluid.
Polish the coating within 2 minutes; allow at least 6 hours without water. SmartBlond: 60 seconds, clean and rinse.
Technical documentation
PDF in Polish · SHOWER CARE KIT + SMARTBLOND ↗
Data from the product description and technical documentation. Follow the current label for the supplied variant and confirm working conditions by a substrate trial.
Surface preparation
First test a small, inconspicuous area.
- Remove deposits, wash, dry and carry out a trial.
- Shake CLEAN, dampen a sponge with it and prepare the surface thoroughly.
SHOWER CARE KIT + SMARTBLOND — Application method
- Wipe off remaining powder with a paper towel without rinsing; a light dust may remain as permitted by the kit instructions.
- Apply COAT with a clean, lightly dampened cloth, working in sections.
- Polish within 2 minutes and leave without contact with water for at least 6 hours.
- For subsequent cleaning, spread SmartBlond, wait 60 seconds, clean with a damp sponge and rinse.
Conditions and drying time
Polish the coating within 2 minutes; allow at least 6 hours without water. SmartBlond: 60 seconds, clean and rinse.
Consumption, packs and calculations
Coating: 5–10 ml/m². The product page gives no numerical coverage for SmartBlond fluid.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
| Pack sizes | Indicative pack coverage |
|---|---|
| kit 100 ml/100 ml + 750 ml | Establish by trial and from the label |
| kit 30 ml/30 ml + 750 ml | Establish by trial and from the label |
| kit 60 ml/60 ml + 750 ml | Establish by trial and from the label |
Example for 50 m²
COAT: 0.25–0.5 l; CLEAN: Establish by trial and from the label; SmartBlond: Establish by trial and from the label
Maintenance and limitations
Declared protection up to 3 years, depending on preparation and maintenance. Impregnation makes cleaning easier; it does not eliminate the need to clean.
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
Storage and safety
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Read the current label and safety data sheet before use. Wear the required personal protective equipment. Do not mix with other products.
SHOWER CARE KIT + SMARTBLOND — Product questions
Which surfaces is this product intended for?
- Shower glass and glazed ceramics. The coating is not intended for plastic, rubber, polycarbonate or metal. Check the cleaner’s scope separately from the coating’s scope.
What consumption should I use?
Coating: 5–10 ml/m². The product page gives no numerical coverage for SmartBlond fluid.
Use the components separately. Do not add cleaner and coating volumes together to calculate coverage.
How should the substrate be prepared?
- Remove deposits, wash, dry and carry out a trial.
- Shake CLEAN, dampen a sponge with it and prepare the surface thoroughly.
How is the product applied?
- Wipe off remaining powder with a paper towel without rinsing; a light dust may remain as permitted by the kit instructions.
- Apply COAT with a clean, lightly dampened cloth, working in sections.
- Polish within 2 minutes and leave without contact with water for at least 6 hours.
- For subsequent cleaning, spread SmartBlond, wait 60 seconds, clean with a damp sponge and rinse.
What conditions are needed for drying?
Polish the coating within 2 minutes; allow at least 6 hours without water. SmartBlond: 60 seconds, clean and rinse.
How should durability and renewal be assessed?
Declared protection up to 3 years, depending on preparation and maintenance. Impregnation makes cleaning easier; it does not eliminate the need to clean.
What are the limitations of use?
- The components have separate purposes and requirements. Do not mix them; plan cleaning, rinsing, drying and impregnation as distinct stages.
How should the product be stored?
- Check storage conditions and shelf life on each component’s label. Keep in tightly closed original packaging, out of children’s reach.
Planning your project with SHOWER CARE KIT + SMARTBLOND
Start by identifying the material, its finish and the result you want to achieve. The product information above sets out the intended use of SHOWER CARE KIT + SMARTBLOND. Check these details against your own surface before deciding on the treatment. A product intended for one material should not be assumed suitable for a different substrate simply because the two look similar.
Measure the area and inspect its condition before ordering. Existing coatings, dirt, uneven absorbency and previous treatments can affect preparation and application. Use a small, representative trial area to check compatibility, appearance and actual consumption. For a large project, compare several locations rather than relying on a single unusually smooth or sheltered patch.
Keep a record of the quantity used during the trial and the area treated. Where a consumption range is provided, use it as a planning guide and confirm it under the actual site conditions. Follow the stated application sequence; do not multiply a complete-treatment consumption figure by the number of coats unless the instructions explicitly require it.
Before applying SHOWER CARE KIT + SMARTBLOND, read the current product label and the linked technical documentation. Keep adjacent materials protected and arrange the work around the required weather and drying conditions. Inspect the result after the specified curing or drying period and plan routine maintenance according to the product’s limitations.
Explore the NANO-BAU product catalogue to compare applications, or contact NANOBIZ.PL for help identifying the appropriate product. This page describes SHOWER CARE KIT + SMARTBLOND; it does not replace the instructions supplied with your particular pack.